| Multipurpose Power Line RFI Filter for Emission Control |
  
UL Recognized
CSA Certified
VDE Approved
Catalog Data Sheet 
Printer friendly version |
|
 |
S Series
- Combines Line to Ground interference rejection filters with additional circuitry to reduce Line to Line noise and transients
- Designed for use when equipment impedance at RF frequencies is high
- Effective for use with switch-mode power supplies
- Effective when used to control emissions in equipment using SCR and T2L circuits for compliance with FCC Part 15, Subpart J and EN55022, Level A, down to 150kHz
Ordering Information
Available Part Number
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
|
3 to 20 Amp |
60 Amp |
| |
@ 120 VAC 60 Hz |
.4 mA |
.75 mA |
| |
@ 250 VAC 50 Hz |
.7 mA |
1.25 mA |
| |
|
|
| Hipot rating (one minute): |
| |
Line to Ground |
2250 VDC |
| |
Line to Line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
3A to 60A |
| |
|
| Operating Ambient Temperature Range (at rated current Ir): |
| |
|
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Electrical Schematics
3, 6, 10VS
20VS
60VS
|
| Case Styles |
| S1 (3, 6, 10A)
| Typical Dimensions: |
| |
Line/Load Terminals(4): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Mounting Holes (2): |
.188 [4.75] Dia. |
20VS1
| Typical Dimensions: |
| |
Line/Load Terminals(4): |
.250 [6.3] with .07 [1.8] Dia. hole |
| |
Ground Terminal(1): |
.250 [6.3] with .07 x .16 [1.8 x 3.8] slot |
| |
Mounting Slots(4): |
.250 x .156 [6.35 x 3.96] Dia. |
20VS6
| Typical Dimensions: |
|
| |
Terminals (5): |
8-32
Torque 18 lbf-in. [2.03 N-m] max. ±2[..22] |
| |
Mounting Slots(4): |
.250 x .156 [6.35 x 3.96] Dia. |
|
|
60VS6
| Typical Dimensions: |
|
| |
Terminals (5): |
1/4-20
Torque 56 lbf-in. [6.32 N-m] max. ±2[..22] |
| |
Mounting Holes (4): |
.218 [5.53] Dia. ± .006 [.152] |
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
± .015 |
(max.) |
| ± .38 |
| 3VS1 |
3.36 |
1.82 |
1.16 |
2.375 |
2.78 |
| 85.3 |
46.2 |
29.5 |
60.33 |
70.6 |
|
| 6VS1, 10VS1 |
3.86 |
2.08 |
1.53 |
2.938 |
3.34 |
| 98.0 |
52.8 |
38.9 |
74.63 |
84.8 |
|
| 20VS1 |
5.23 |
3.38 |
1.53 |
3.75 |
4.20 |
| 132.8 |
85.9 |
38.9 |
95.25 |
106.7 |
|
| 20VS6 |
5.34 |
3.38 |
1.53 |
3.75 |
4.20 |
| 132.8 |
85.9 |
38.9 |
95.25 |
106.7 |
|
| 60VS6 |
7.2 |
3.08 |
2.28 |
5.63 |
6.28 |
| 182.88 |
78.23 |
57.91 |
142.87 |
158.78 |
|
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
| |
3VS
|
6VS
|
10VS
|
20VS
|
60VS
|
|
|
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
Differential Mode / Symmetrical (Line to Line) |
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
|
| 3A |
15 |
27 |
35 |
40 |
32 |
44 |
47 |
47 |
|
| 6A |
15 |
27 |
35 |
40 |
32 |
44 |
47 |
47 |
|
| 10A |
15 |
27 |
35 |
40 |
32 |
44 |
47 |
47 |
|
| 20A |
15 |
30 |
38 |
38 |
32 |
43 |
42 |
40 |
|
| 60A |
7 |
27 |
34 |
38 |
45 |
54 |
44 |
40 |
|
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.3 |
.5 |
1 |
2 |
5 |
10 |
20 |
30 |
|
| 3A |
35 |
50 |
65 |
65 |
65 |
60 |
50 |
40 |
45 |
| 6A |
35 |
50 |
65 |
65 |
65 |
60 |
45 |
48 |
48 |
| 10A |
35 |
50 |
65 |
65 |
65 |
60 |
50 |
40 |
45 |
| 20A |
15 |
30 |
38 |
38 |
32 |
43 |
42 |
40 |
|
| 60A |
37 |
- |
77 |
93 |
86 |
70 |
54 |
64 |
54 |
|
|
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
