| High Performance Compact RFI Power Line Filters with IEC Connectors |
  
UL Recognized
CSA Certified
VDE Approved
15A versions are tested by Underwriters Laboratories to US and Canadian requirements and are
VDE approved at 10A, 250VAC
Catalog Data Sheet 
Printer friendly version |
|
 |
ED Series
- Two element circuit provides medium attenuation
- Available with an internal ground-circuit inductor (C versions) to isolate equipment chassis from power line ground at radio frequencies
- Versions up to 15A
- Similar to EEJ Series with alternative termination options
- See the EC Series for better differential mode performance
Ordering Information
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
@ 120 VAC 60 Hz |
.22 mA |
| |
@ 250 VAC 50 Hz |
.38 mA |
| |
|
|
| Hipot rating (one minute): |
| |
Line to Ground |
2250 VDC |
| |
Line to Line |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
250 VAC |
| |
|
|
| Rated Current: |
1A to 15A |
| |
|
| Operating Ambient Temperature Range (at rated current Ir): |
| |
|
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Electrical Schematic
Accessories
GA400: NEMA 5-15P to IEC 60320-1 C13 line cord
FA601: Insulating Shroud
 
|
| Case Styles |
ED1 & ED1C
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia.
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Terminals (2): |
.250 [6.35] with .07 [1.8] Dia. hole |
| |
Ground Terminal (1): |
.250 [6.35] with .07 x .16 [1.8 x 4.1] slot |
ED2
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia.
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Terminals (2): |
.250 [6.35] with .07 [1.8] Dia. hole |
| |
Ground Terminal (1): |
.250 [6.35] with .07 x .16 [1.8 x 4.1] slot |
ED4 & ED4C
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia. with .236 [5.99] Dia. x 90º
countersink for #4 flathead screw
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
|
|
ED8 & ED8C
| Typical Dimensions: |
| |
Mounting holes (2): |
.132 [3.35] Dia.
|
| |
Line Inlet (1) |
IEC60320-1 C14 |
| |
Wire Leads (3): |
4.0 [101.6] Min., 18AWG, UL1015 |
Recommended Panel Cutouts
Note 1: ED1 and ED8 allow for front or back mounting
Note 2: ED2 and ED4 allow for back mounting only
Case Dimensions
| Part No. |
A |
B |
C |
D |
E |
F |
| (max.) |
(max.) |
(max.) |
± .015 |
(max.) |
(ref) |
| ± .38 |
| 1ED1, 3ED1, 6ED1 |
2.21 |
1.19 |
0.81 |
1.575 |
1.98 |
|
| 56.0 |
30.2 |
20.6 |
40.01 |
50.3 |
|
|
| 1ED2, 3ED2, 6ED2 |
1.55 |
1.19 |
0.85 |
1.575 |
1.98 |
|
| 39.4 |
30.2 |
21.6 |
40.01 |
50.3 |
|
|
| 1ED4, 3ED4, 6ED4 |
1.55 |
1.19 |
0.85 |
1.575 |
1.98 |
.295 |
| 39.4 |
30.2 |
21.6 |
40.01 |
50.3 |
7.5 |
|
| 1ED8, 3ED8, 6ED8 |
1.55 |
1.19 |
0.81 |
1.575 |
1.98 |
.295 |
| 39.4 |
30.2 |
20.6 |
40.01 |
50.3 |
7.5 |
|
| 6ED4C |
1.98 |
1.19 |
0.85 |
1.575 |
1.98 |
.295 |
| 50.3 |
30.2 |
21.6 |
40.01 |
50.3 |
7.5 |
|
| 6ED8C |
1.98 |
1.19 |
0.81 |
1.575 |
1.98 |
.295 |
| 50.3 |
30.2 |
20.6 |
40.01 |
50.3 |
7.5 |
|
6ED1C,
10ED1, 10ED1C
15ED1 |
2.62 |
1.19 |
0.81 |
1.575 |
1.98 |
|
| 66.5 |
30.2 |
20.6 |
40.01 |
50.3 |
|
|
| 15ED8 |
1.98 |
1.19 |
0.81 |
1.575 |
1.98 |
|
| 50.3 |
30.2 |
20.6 |
40.01 |
50.3 |
|
|
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
| |
| 1ED
|
3ED
|
6ED
|
6ED1C
|
| 10ED1 & 10ED1C
|
15ED
|
|
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
Differential Mode / Symmetrical (Line to Line) |
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
|
| ED1, ED2, ED4, & ED8 |
|
|
|
|
|
|
| 1A |
24 |
35 |
42 |
49 |
52 |
54 |
| 3A |
20 |
29 |
36 |
45 |
50 |
54 |
| 6A |
14 |
23 |
30 |
41 |
45 |
50 |
| 10A |
8 |
14 |
20 |
35 |
39 |
45 |
| 15A |
4 |
9 |
12 |
28 |
34 |
40 |
| ED1C |
|
|
|
|
|
|
| 6A |
14 |
20 |
25 |
37 |
42 |
50 |
| 10A |
8 |
14 |
20 |
35 |
39 |
45 |
| ED4C, ED8C |
|
|
|
|
|
|
| 6A |
14 |
20 |
25 |
37 |
42 |
50 |
|
|
|
| Current Rating |
Frequency - MHz |
| .15 |
.5 |
1 |
5 |
10 |
30 |
|
| ED1, ED2, ED4, & ED8 |
|
|
|
|
|
|
| 1A |
3 |
15 |
20 |
37 |
37 |
36 |
| 3A |
3 |
15 |
20 |
37 |
37 |
36 |
| 6A |
3 |
15 |
20 |
31 |
35 |
34 |
| 10A |
6 |
15 |
20 |
23 |
44 |
47 |
| 15A |
6 |
18 |
23 |
33 |
44 |
47 |
| ED1C |
|
|
|
|
|
|
| 6A |
7 |
17 |
23 |
36 |
42 |
42 |
| 10A |
6 |
15 |
20 |
23 |
44 |
47 |
| ED4C, ED8C |
|
|
|
|
|
|
| 6A |
7 |
17 |
23 |
29 |
38 |
42 |
|
|
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
