| High Performance 3-Phase RFI Power Line Filters for WYE Applications |
  
UL Recognized
CSA Certified
VDE Approved
Catalog Data Sheet 
Printer friendly version |
|
 |
A Series
- For 3-phase, four wire, WYE Applications
- Filters each of the three lines plus the neutral and ground line
- Both common mode and differential mode suppression from 50kHz to 30MHz
- Effective for both balanced and unbalanced loads
- Ground choke included
- Optional end bell kits available to shield input and output terminals
- AYP single stage for lower noise environments
- AYT dual stage provides highest performance
Ordering Information
Available Part Numbers
Click on any part number for 3D CAD models, customer drawings, distributor stock status and eCommerce Links.
|
|
Specifications
| Maximum leakage current, each Line to Ground: |
| |
@ 120 VAC 60 Hz |
1.4 mA |
| |
@ 250 VAC 50 Hz |
3.4 mA |
| |
|
|
| Hipot rating (one minute): |
| |
Line to Ground |
1500 VAC |
| |
Neutral to Ground |
1500 VAC |
| |
Line to Neutral |
1450 VDC |
| |
|
|
| Operating Frequency: |
50 / 60 Hz |
| |
|
|
| Rated voltage (max.): |
|
| |
Phase to Phase |
440 VAC |
| |
Phase to Neutral / Ground |
250 VAC |
| |
|
|
| Rated Current: |
20A to 60A |
| |
|
| Operating Ambient Temperature Range (at rated current Ir): |
| |
-10°C to +40°C |
In an ambient temperature (Ta) higher than +40°C
the maximum operating current (Io) is calculated as
follows: Io = Ir √(85-Ta)/45
|
Electrical Schematics
AYP6C Models
AYT6C Models
|
Case Styles
Case Dimensions
| Part No. |
A* |
B |
C |
D |
E |
| (max.) |
(max.) |
(max.) |
± .030 |
± .015 |
| ± .76 |
± .38 |
20AYP6C
30AYP6C |
8.82 |
5.57 |
2.56 |
4.616 |
1.50 |
| 224.0 |
141.5 |
65.0 |
117.2 |
38.1 |
|
45AYP6C
60AYP6C |
9.43 |
6.92 |
4.82 |
5.950 |
3.75 |
| 239.5 |
175.8 |
122.4 |
151.1 |
95.3 |
|
20AYT6C
30AYT6C |
13.82 |
5.57 |
2.56 |
4.616 |
1.50 |
| 351.0 |
141.5 |
65.0 |
117.2 |
38.1 |
|
45AYT6C
60AYT6C |
13.83 |
6.92 |
4.82 |
5.950 |
3.75 |
| 351.3 |
175.8 |
122.4 |
151.1 |
95.3 |
|
| * For end bell covering terminals and connections, add: |
| 20A & 30A |
5.57 |
|
| 141.48 |
| 45A & 60A |
6.45 |
| 163.83 |
|
|
Accessories
Mounting bracket kit with captive nuts:
AA400: 20A & 30A versions
AA405: 45A & 60A versions
Protective cover for use with mounting bracket (Available in Europe only):
AA406A: 20A & 30A versions
AA407A: 45A & 60A versions
End bell kit (bracket and cover) with captive nuts:
AA406: 20A & 30A versions
AA407: 45A & 60A versions
Additional captive nuts
AA401: 10 nuts
|
Performance Data
| Typical Insertion Loss |
| Measured in closed 50 ohm system |
| |
20AYP6C
|
30AYP6C
|
45AYP6C
|
60AYP6C
|
20AYT6C
|
30AYT6C
|
45AYT6C
|
60AYT6C
|
 |
| Minimum Insertion Loss in dB: |
| Measured in closed 50 ohm system |
| |
|
|
| Common Mode / Asymmetrical (Line to Ground) |
|
Differential Mode / Symmetrical (Line to Line) |
|
|
|
| Current Rating |
Frequency - MHz |
| .05 |
.1 |
.15 |
.5 |
1 |
5 |
10 |
30 |
|
| AYP6C |
| 20A |
22 |
32 |
39 |
55 |
56 |
65 |
65 |
54 |
| 30A |
15 |
24 |
30 |
55 |
55 |
61 |
63 |
50 |
| 45A |
8 |
19 |
25 |
49 |
49 |
56 |
58 |
45 |
| 60A |
5 |
16 |
22 |
50 |
50 |
54 |
54 |
47 |
| AYT6C |
| 20A |
45 |
63 |
70 |
75 |
75 |
75 |
75 |
65 |
| 30A |
29 |
53 |
61 |
75 |
75 |
75 |
75 |
60 |
| 45A |
15 |
39 |
43 |
75 |
75 |
75 |
75 |
50 |
| 60A |
12 |
37 |
46 |
75 |
75 |
75 |
70 |
45 |
|
|
| Current Rating |
Frequency - MHz |
| .05 |
.1 |
.15 |
.5 |
1 |
5 |
10 |
30 |
|
| AYP6C |
| 20A |
20 |
38 |
50 |
65 |
65 |
65 |
60 |
52 |
| 30A |
18 |
28 |
43 |
65 |
65 |
65 |
59 |
48 |
| 45A |
8 |
20 |
27 |
60 |
65 |
65 |
56 |
43 |
| 60A |
20 |
24 |
27 |
60 |
65 |
65 |
56 |
50 |
| AYT6C |
| 20A |
27 |
56 |
65 |
70 |
70 |
70 |
70 |
70 |
| 30A |
17 |
46 |
55 |
75 |
75 |
75 |
75 |
70 |
| 45A |
14 |
41 |
50 |
75 |
75 |
75 |
75 |
65 |
| 60A |
26 |
50 |
58 |
75 |
75 |
75 |
75 |
60 |
|
|
| USA Customer Service: |
1-800-468-2023 |
| Corcom Products Direct: |
1-847-680-7400 |
| Germany: |
49-89-6089-0 |
|
|
Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. |
